Buy Level 5 Drywall Bazooka Online

We’ve talked in previous blog posts about how the use of automatic drywall taping tools can have a host of benefits when compared with doing the work traditionally by hand. But, when you invest in an automatic taper, you’ll want to know that it has the sort of mark of quality that won’t let you down in a hurry. After all, the pluses of using it have to outweigh the initial cost of buying one.

When we source plastering tools and equipment from companies all over the world, we listen to what people are saying about them and we see for ourselves how they work. We want our customers to have the best quality tools at the best prices and that’s where more than 50 years experience in the plastering industry comes in useful.

At Gypsumtools we like the Level 5 brand, because, unlike many budget brands that are out there, the quality of their tools is pretty superior, with prices starting at the sort of figures you might pay for even second hand tools.

So, that’s why, when you’re a professional plasterer looking for a decent every day automatic taping tool to add to your kit, a good option is to buy Level 5 Drywall Bazooka online.

bazooka-drywall

How Can A Drywall Bazooka Taping Tool Help You?

The name bazooka speaks for itself really, but if you are wondering how can a drywall bazooka taping tool help you, then the benefits are definitely worth taking note of.

First off, there’s the time saved, because you know it’s going to apply the correct amount of compound at the same consistency throughout, saving you time in concealing your drywall joints and getting an impressively flawless finish at the end.

The safety element comes in with the fact that it can reach places you would normally need a stepladder or stilts for and it also means less muscle fatigue in trying to get to those hard to reach places. And because it decreases the time taken to do it to a good standard, it means less drain on your energy resources at the end of a laborious job.

https://www.youtube.com/watch?v=rRmJkndlrGQ

About the Level 5 Bazooka Taping Tool

If you want to find out more about the Level 5 Bazooka Taping Tool, take a look at the demo video and details that we have on it online. Some of the great features of the bazooka include corrosion-resistant, coated, aircraft-grade aluminum which resists job site damage and provides superior durability while prolonging the plunger life and reducing seal leakage.

Stainless steel side and internal plates mean greater performance and durability, offering a tool which will not corrode over time. Also, the cast aluminum head components are precision-machined from high-grade cast aluminum for added strength, while the manufacturers claim that the urethane cup seal lasts 50% longer than those used in other products.

online shopping cart logo

Contact Us with Bazooka Taping Tool Enquiry

If you’re looking for an automatic taping tool that is of excellent value, but still great quality, you can contact us with your Bazooka Taping Tool enquiry today. Or for further information, why not take a browse through our extensive range of plastering products online.

How can a drywall Automatic Finishing Set help you?

There’s a lot to be said for taking pride in using traditional plastering methods and seeing a job done properly, professionally and well. However, the fact that there are tools out there which make the job easier, while still achieving flawless results, should definitely not be ignored.

Finishing drywall can be a painful, lengthy and laborious task when done by hand, because, after you’ve put all the panels up, the task of effectively concealing all the joints can take some time – not to mention if you have a load of sanding to do afterwards.

automatic level 5 taper

So, how can a drywall automatic finishing set help you?

Well, first off, there’s the consistency factor, because drywall taping tools will apply the correct amount of paper tape and compound at the same time, with the same consistency and thickness all the way along. Because of this, you will be guaranteed a more flawless end result which means less unhappy customers and less call backs.

The taping tool is also safer because it reduces the need for balancing on stilts and stepladders to get up to hard to reach places, creates less dust because of less sanding afterwards and there’s no need to be stopping every five minutes to scoop up more compound, so again, no climbing up and down ladders.

There’s no worry about creasing the tape on your corners either, because the finishing set comes with a corner roller. And, talking of corners, the corner applicator and finisher allow you to finish both sides of a corner at the same time. Just that should be enough to make you turn your back on the traditional applicator knife!

level-5-pro-premium-set

Why buy the complete automatic finishing set?

Yes, there are certainly a lot of upsides to using a drywall automatic finishing set, but you might be wondering why buy the complete set? Why not just buy it in separate parts?

As with any set of tools, there comes a certain amount of discount to be had with buying in bulk. Not only this, you will know you have everything you need to get the job done. There’s no forgetting an essential piece of kit and having to down tools to go get it.

If you check out our Level 5 Starter Finishing Set, for example, it comes with everything you need – from flat boxes and a compound pump to 8” corner applicator, 3” finisher and rollers plus handles.

The Level 5 brand is widely respected around the world because it offers high quality, innovative and effective tools that come at the same prices that some worn out tools sell for. It also has a five year warranty on the rare chance that something might go wrong.

https://www.youtube.com/watch?v=ICYz5tGm96c

Order Level 5 Auto Taping Tool Set today

If you’re interested in new drywall finishing tools that will get the job done quickly and professionally every time, then you can order your Level 5 auto taping tool set from us today.

Contact us with your Drywall Automatic Finishing Set enquiries

At Gypsumtools, more than 50 years experience in the plastering industry means we actively look for the sort of plastering tools and equipment that will do the best job for our customers while not breaking the bank. If you have any questions, feel free to contact us with your drywall automatic finishing set enquiries. Our professional and friendly team would be more than happy to assist.

The Ultimate Guide to Plastering a Wall

book on the ultimate guide to plastering a wall

There’s a lot to be said for knowing how to plaster a wall properly, both in the amount of time and effort it can take you, not to mention your level of satisfaction with the finished result.

The last thing you want is imperfections on your wall that are going to bug you for years to come so first off, make sure when you plaster a wall that you follow the six stages of plastering in the correct order, that you keep your tools clean and have the right kit to hand.

We have put together the ultimate guide to plastering a wall which will take you through the stages you need to follow, show you what you need and explain exactly how to master the perfect layer of plaster – with some handy hints and tips added in along the way!


Click here to see our plastering tools and equipment – we stock everything you need!


Kit Needed

You may be wondering about the kit needed to get you started. After all, its always a good idea to be prepared well in advance, so you don’t have to down tools and leave the job halfway through to stock up. It therefore would be useful to make sure you have the following:

1.Plasterer’s trowel and bucket trowel

2.Plasterers Float

3.Corner trowel

4.Hawk

5.Bucket x2

6.Mixing stick or paddle

7.Plaster

8.Clean Water

9.Sandpaper

10.Stepladder or stilts

11.Flat Mask

How to plaster a wall step by step

Using a hawk and trowel correctly can be quite a challenge to start with if you’re not used to handling them, so before you put the layer of plaster on the wall, practise using them effectively so you don’t end up in a mess.

Before you start, make sure your wall is clean by removing bits of existing plaster, dust or wallpaper as you go and check the suction of your wall to make sure it isn’t too porous. If this is the case, it will suck the moisture out of the plaster so fast that it won’t have a chance to work before it dries. So, control the suction of your wall with water or PVA, which should satisfy the thirst of the wall, stopping it from stealing the moisture from your plaster too quick.

removal of old wallpapers with spatula
A handy tip when wetting your walls is to use a fine mist spray gun to avoid having to keep reaching down to re-wet your brush. Once the water starts running down the wall, you know you’ve controlled the suction.

Low suction backgrounds, such as painted surfaces will also need to be properly prepared, perhaps by using a mix of PVA glue and water to ensure the plaster sticks to the wall. You could also try adding a handful of sand to the PVA glue mixture to give it a rougher texture and better adhesion when you apply PVA. You’re then ready to start plastering your wall.


Click here to see out plastering tools and equipment – we stock everything you need!


Plaster and water mix together roughly half and half – so half a (clean) bucket of water should make a full bucket of plaster. When mixing up your plaster it should have a thick, creamy consistency with no lumps. Try adding just enough to make a heap on top of the water to start with and the dry plaster must be added TO a bucket of clean water, NOT the other way around.

Mixing of a plaster
You can then mix your plaster slowly using a special paddle or mixing stick, but always have another bucket of water to hand to clean your tools. Trying to get hard plaster off your tools at the end is not much fun at all!

TIPWhen plastering a room, try not to do two walls that are touching each other as you risk damaging one wall while plastering the other. Turn all radiators off in the room too, to stop the plaster drying too quick. Beginners should start on a small area first to ensure they’re getting the technique right, so start with an area which only takes 30 mins or less for the first coat.

Tilting the hawk towards you, skim a small amount of the plaster from your hawk onto your trowel in one swift smooth movement (this can take some practice). Then run a horizontal top border line along the top section of the area you are looking to plaster and try to work from right to left. Work the plaster right into the edges creating a flat even layer of plaster. Don’t worry at this point about small holes and ridges, or smoothness, as long as that first coat is flat and even. It should be around 2mm thick (no more).

Man plastering
Once you’ve done the top border, carry on putting the plaster on the wall, this time in an upwards or vertical motion, which curves around as it reaches the border at the top. As you add the plaster to the wall, angle the leading edge of the trowel away from the wall and gradually flatten the trowel closer and closer to it as you move along and the plaster comes off the trowel. Remember to keep curving it around as you overlap the top border.

Every time you do a sweep upwards, go over it with a fairly flat trowel at an angle of 10-15mms to flatten everything you’ve just done. Remember you are looking for a flat and even surface here, with no bulges – don’t worry too much about trowel marks at this stage.

It could be the case (especially if it’s your first time) that you haven’t gradually decreased the angle of your trowel as you moved along the wall, perhaps you flattened the trowel to the wall too soon or overcompensated and things got quite messy. If this is the case and you have ended up with lots of levels of thickness you can go over it again with a fairly flat trowel angled at about 10mm to flatten out where you’ve been. Combine the flatness of the trowel with firm pressure all the way through to flatten and fill in any holes.

If you’re going too quick and not flattening the trowel quickly enough, you may get the scraping effect which means the top edge of the trowel is coming away from the wall, so it needs to come in a bit. The secret here is to go slowly and keep an eye on the gap between the trowel and the wall, using a firm pressure as you go.


Click here to see our plastering tools and equipment – we stock everything you need!


Also, when you plaster a wall, remember to try and remove annoying bits of grit straight away and make sure you keep everything clean. The next stage is to flatten the first coat off and give your trowel a quick clean. The sole purpose of this stage is to get your wall flat and knock the ridges back because if you don’t at this stage, you are just plastering over an already uneven wall once it has dried and this can only lead to an even more uneven, bumpy wall further down the line.

So, wait until the plaster is tacky and run your trowel over the wall. It’s important to wait until the wall has dried to a tacky consistency (and this can take between 5 and 15 minutes) because if not, you won’t notice the improvement.

Plasterer flattening plaster
Do, however, try and keep an eye on just how quickly the top coat of plaster hardens. As soon as the first coat is on, it is usually ready to be trowelled up and the second coat of plaster applied. This is why it makes sense to only plaster certain sections of the wall at a time to ensure it doesn’t dry out completely before you trowel up and apply your next coat.

Perhaps try putting a small amount of plaster on a piece of off cut and work out how quickly it dries before you attempt a large section of your wall – after all, it’s when the wall has gone tacky (firm, but not hard) that the imperfections can be removed using a trowel. If the plaster has dried completely, only sanding the wall will remove the holes and ridges and this can be a painful and laborious task.

Once you’ve flattened out your first coat of plaster, next is time for the second coat. This is similar to the first layer of plaster but it’s thinner, so use smaller amounts on your trowel. Aim for around 1mm of thickness and a flat even coat.

Also remember to push firmly with your trowel again, because if you don’t push hard enough when you run the trowel over the wall, you could end up with a series of holes. So push hard enough to push the plaster along the whole length of the trowel and into the holes using firm pressure. Move the flattish trowel along the wall with a leading edge of around 10-15mm and combine this with firm pressure.


Click here to view our entire range of plastering and drylining tools!


Don’t worry so much about trowel marks, you may even notice ridges caused by the trowel get worse when doing this, but these will be pushed out in the next stage when the plaster is a little firmer. Try and just focus on not leaving too many holes and make sure everything ends up nice and flat by the time you have finished the second coat of plaster.

Plasterer adding second coat
Next, give your trowel a clean again, then using a trowel and brush when the wall is tacky it’s time to clean the borders and make sure that your corners are tidy.

Ensure all excess plaster is removed from the corner, then it can be formed with a brush. A paintbrush is useful here – just wet it with clean water then flick off the excess water. Point the paintbrush more at the wall you are skimming up to and run the brush in big strokes up and down the corner. Generally at this stage the plaster can be quite wet so use a little pressure.

Any brush marks left in the corner can be lightly trowelled out – but again if it is really wet it may be better to leave until the next stage. You can use water at this point to get a good clean, but don’t flick too much water on your walls unless you need it, or you can end up with a slurry effect on the plaster. Pass the trowel over sections of the wall and look for hollow areas or holes, then work the plaster into them. Moving from left to right, cover the whole area, working the plaster around the wall to keep it flat and fill hollow areas.

Again the trowel marks will come out later on. Leave the wall to get tacky once more and then it’s time to get the trowel marks out – this is called the trowelling up process. As the plaster sets it will darken in colour, which means it’s time for the final trowel.

Plaster-third-coat
Don’t over polish the plaster on the final dry trowel stage – it should be even and slightly polished, but feel like an eggshell – any smoother, it makes paint and wallpaper a nightmare to stick to. This final pass over the wall can be helped if your plaster is setting too hard, by applying clean water to the wall with a wide brush and following behind it with your float to give you a nice smooth finish.

Bear in mind that as you complete the finish, the float can pull plaster from high spots on the wall to the lower spots, but remember, you can always add more plaster where and when it is needed or wipe any surplus from your float onto your hawk. The main thing when plastering a wall is to remember to work through all of the different stages one at a time and bear in mind that it gets easier as the setting process begins to happen. If you have done this it should minimise the amount of sanding needed once the wall has dried and save you extra time, effort and frustration in the process. efina-adjustable-corner-trowel A quick guide to corners… If you make sure your corners are done well, then it gives you a greater chance of making sure that the rest of your wall will look good too, so it’s worth taking the time to get it right.

Try these following steps to help you along… Use a trowel or scraper to fill the corner gap between the plaster walls with the first coat, making sure to scrape off any excess. Once the first coat is dry, use the trowel or scraper blade to take off any small ridges. Then, cut a piece of paper tape to the height of your wall. Fold the tape in half so there is a crease running down the centre of it. You can then apply a thin coat of plaster base coat to both sides of the internal corner and press the tape over the top.

Once it is in place, use the trowel or scraper to flatten it onto the wall, squeezing out any excess plaster, then leave it to dry. Use your paint scraper or trowel to apply a top coat of plaster on both corner faces. Then run an internal corner plaster tool over the top coat to give it a flat and flawless finish.

Order your plastering tools from Gypsumtools

If you’re looking to plaster a wall for the first time and you are unsure of the kit you need, you can order your plastering tools from Gypsumtools, with members of our team readily on hand and available to answer any queries you might have. With over 50 years experience in the plastering industry, we are always looking for the best tools and techniques that there are in plastering, so give us a call, drop us a line or take a browse through our products online to find out more.